AT Series Linear Actuators are widely used in Adjustable beds, Medical beds, Wheel chairs, Patient hoists, Table height adjustments, Industry mechanical  instruments and so on.

Specification of AT Series Linear actuators:

◇ Max. Thrust: 4000N, 6000N, 8000N

◇ Voltage:24VDC or 12VDC, Permanent Magnet Motor Drive

◇ Standard stroke: 100 / 150 / 200 / 250 / 300 / 350 / 400 mm, special stroke are

    available according to customer' requirement.

◇ Duty cycle:10%

◇ Ambient temperature -5°C (23F) to +40°C (104F)

◇ Standard protection class :IP 54

◇ Built-in integral limit switch, not adjustable after leaving factory

◇ Low noise design, dB<48(A); The inspection method is in accordance with DS/EN ISO3746 while linear actuator is unloaded.

◇ Overload protection

◇ CE Certificated

◇ Availability in Black, White and Blue housing.

Standard Stroke and Min. Install Dimension

Technical Specification