Magnetic Fuel Saver

What is Magnetic Fuel Saver?     

Magnetic Fuel Saver (Magnetic conditioners) is a perfect and amazing type of magnetic assembly for automotive.  Magnetic Fuel Saver is designed to condition the fuel prior to combustion to increase power output, save fuel, and reduce emissions.
1) Magnetic Fuel Saver can help engine to burn fuel more efficiently
2) Magnetic Fuel Saver let your car run more miles per gallon
3) Magnetic Fuel Saver will improve engine performance
4) Magnetic Fuel Saver will reduce emissions
5) Magnetic Fuel Saver will clean air

Magnetic Fuel Saver (Magnetic Fuel Conditioner) gadgets increase combustion efficiency for a cleaner burning engine. This reduces harmful emissions while increasing engine performance.

Enjoy these benefits of Magnetic Fuel Saver (Magnetic Fuel Conditioner)
1) Save fuel, save money, more miles per gallon
2) It can save 10% ~22% fuel
3) 50% reduction of carbon monoxide and hydrocarbons
4) Helps pass emission testing
5) High octane performance with lower octane fuel
6) Improved performance - quicker starts
7) Stops scale build-up and corrosion in engine
8) Reduced wear on O2 sensor and catalytic converter   

The constant magnetic field, the application of high-energy fuel cut to a certain pressure and flow rate of the magnetic field lines, make it smaller molecules and rearranged viscosity reduction in activity increased after the jet dispersion greater, fog effects, making the burn more completely.

Explosive energy more emissions reduction, this technology without adding any energy and chemical agents, the engine does not need any technical, extraordinary power is produced under normal use and reduce harmful gases. Large Aerosol Effect, making the burn more completely.

More informaiton of Dailymag Magnetic fuel saver:

The cost of fossil fuels such as gasoline, petrol, fuel, diesel, and natural gas has increased daily. The annual fuel expenditure of industries, companies, and even the personal automobile has become a concern. There is a need to find a solution or a replacement. The world's dependency on fuel use cannot be replaced; however, specific devices can be introduced to reduce fuel energy and cost. Several other issues, i.e., environmental pollution, increasing energy demand, global warming, and human health, are also associated to fuel usage. In such circumstances, the users tend to use lesser fuel with high efficiency. Several inventors claim different methods to save energy. These methods may include conventional filters, additives, and catalyst usage. Nowadays, more advanced technology related to magnets and electricity are widely used. The magnetic fuel savers are very efficient and depend upon the magnetic flux to complete its action. Our products are very reliable, eco-friendly, and cost-effective. We facilitate our customers in case of any query regarding selecting the best suitable device for their application. Besides the standard designs, we can also customize the magnetic strength and size of the device upon the customer's requirement.

Characteristics:

Our magnetic fuel-saving devices are designed by highly experienced technologists who ensure specific vital characteristics of our product:

• It is made with best-grade permanent magnets.
• The magnetic flux intensity is optimized relative to the commonly used fuels.
• It helps in the reduction of air pollution.
• It ionized and distorted the fuel vapors efficiently.
• It is beneficial for the life and maintenance of the engine.
• It is easy to use and eco-friendly.
• It saves 8% diesel, 15% petrol, and almost 20% CNG.

A magnetic fuel saver is a device that is designed to facilitate the combustion of hydrocarbons by changing their organization, charge, and atomic characteristics. When applied to fast moving fuel in a perpendicular direction, the magnetic flux causes the cation formation. These cations carry out complete combustion and less emission. These attributes help in enhancing the mileage of the automobile. Usually, the fuel contains compact hydrocarbons which are not properly combusted before emission. Due to this reason, more fuel is required. A magnetic fuel saver enhances the tendency of combustion to reduce the usage of fuel. Moreover, it also extends the engine life and reduces the expenses of maintenance. The use of magnetic fuel savers also helps in the reduction of harmful gas production.

Basic principle:

A magnetic fuel saver contains heavy quality magnet producing a specific extent of the magnetic field. When a paramagnetic substance passes through such a field, the magnetic flux usually tends to converge. In contrast, in hydrocarbons, the magnetic flux diverges and molecules become scattered, ionized, and more oriented. When burns in the engine, such treated fuel picks up maximum oxygen, which results in the 100% incineration of the fuel. This efficient utilization of fuel reduces the requirement of fuel.

This phenomenon is not that simple, i.e., the specific extent of the magnetic field is adjusted for a particular type of fuel. The optimized magnetic intensity for aromatic fuels differs from non-aromatic fuels. Moreover, magnetic fuel saver design depends on the requirement of some factors such as magnetic permeability, retention time, and magnetic flux density.

Magnet adjustment:

The magnets of magnetic fuel savers are placed or adjusted so that the south pole of the magnet faces the direct pathway of fuel current while the North pole is placed slightly far from the fuel passage. Actually, the physical state of fuel stored in the fuel tank is liquid, but it is volatilized to ensure efficient air mixing before combustion. The higher the concentration of properly mixed air, the higher will be the extent of fuel combustion. The magnet adjustment produces specific gases of the magnetic field to distort and ionize the fuel molecules. During this process, the total orientation of the molecules is also changed, and they start moving in a perfect alignment. In simple words, the magnetic field enhances the dispersion and distortion of fuel molecules while reducing their viscosity.

Magnets present in the magnetic fuel saver produce a high capacity magnetic flux which can perform the following basic functions:

• The fuel passed through the magnetic field got ionized. As a result of magnetic treatment, the cations produced tend to attract toward the free oxygen of the air.
• The hydrocarbons present in standard fuel are very compact and tightly bonded to each other. This confirmation does not allow the passage of air through them and retards the complete combustion.
• The magnetic field also transforms the hydrocarbon molecules into a highly energized state, i.e., in ortho spin form.

Advantages:

Magnetic fuel savers are the most advanced and highly reliable devices that reduce fuel usage. It has many advantages over the conventional ways. Following are some crucial advantages of using a magnetic fuel saver:

• It enhances the efficiency and output of the fuel used.
• Fuel's thermal capability is also increased by this process.
• The deposition of carbon derivative residues in the engine was also reduced.
• It also lessens the extent of gas and residue emission.
• It does not require the addition of any expensive catalyst in the fuel.
• It is eco-friendly as it prevents or lessens the emission of hazardous gases in the environment.
• It reduces the engine maintenance intervals.

Our Dailymag magnetic fuel saver can save up to 20% of the CNG or LPG usage. It can facilitate the rickshaw drivers because of mostly rickshaws work on CNG. Other automobiles such as motorbikes and cars require petrol. Our device can help in the reduction of almost 15% petrol utilization. Many domestic applications, i.e., cooking and baking, depend upon the burning of PNG, which can also reduce about 20% by using our magnetic fuel saver. Heavy machinery used in construction and weight lifting such as Cranes, loader trucks, large buses work on diesel. Our magnetic fuel saver can help in the 8% reduction of diesel cost. It is essential to make it clear that our products are completely tested before their sale. Therefore, their adoption in automobiles is very safe. Moreover, It also helps reduce the production of harmful greenhouse gases, i.e., safe for the environment.

Early Design Turbomag Magnetic Fuel Saver from Dailymag >>

These assemblies can also be used on water pipes, as some people find that magnets "soften" water and reduce scale build up.
Magnetic Fuel saver can be used in water softening >> Magnetic Water Conditioner